Suzuki WagonR+ RB310 Service Manual page 1314

DTC C1071 – ABS Control Module
1. ABS hydraulic unit/control module assembly
2. ABS pump motor FET
DESCRIPTION
This DTC will be set when an internal malfunction is detected in the ABS control module.
INSPECTION
Step
1 Clear all DTCs and check DTC.
Is it DTC C1071?
2 1) Check proper connection of ABS hydraulic
unit/control module connector.
2) If OK, disconnect ABS hydraulic unit/control
module connector and check the followings.
• Voltage "E99-1" terminal : 10 – 14 V
• Resistance between "E99-26" and body
ground : Continuity
Are the check result as specified above?
3. ABS pump motor
4. ABS fail safe FET
Action
ANTILOCK BRAKE SYSTEM (ABS) 5E-23
5. ABS hydraulic unit/control module connector
Yes
Go to Step 2.
Replace ABS hydraulic
unit/control module
assembly.
No
Could be a temporary
malfunction of the ABS
control module.
Repair and recheck.