Suzuki WagonR+ RB310 Service Manual page 451

3A-2 FRONT WHEEL ALIGNMENT
Front Wheel Alignment Specifications
Toe (total)
Camber
Caster
Side Slip Limit mm/m
Steering Angle
(Turning angle)
NOTE:
Toe value in the specifications table was measured by using a toe-in gauge.
Front alignment refers to the angular relationship between the front wheels, the front suspension attaching parts
and the ground. Generally, the only adjustment required for front alignment is toe setting.
Camber and caster can't be adjusted. Therefore, should camber or caster be out of specification due to the
damage caused by hazardous road conditions or collision, whether the damage is in body or in suspension
should be determined. If the body is damaged, it should be repaired and if suspension is damaged, it should be
replaced.
General Description
Item
Inside
Outside (Reference)
Front Wheel
0 ± 1 mm
–0 ° 20' ± 1 °
3 ° 40' ± 1 °
0 – IN 3 mm/m
35 ° ± 3 °
31 ° ± 3 °