Suzuki WagonR+ RB310 Service Manual page 1143

7B1-178 AUTOMATIC TRANSAXLE (M13 ENGINE MODEL)
Available shim thickness
Thickness
1.80 mm (0.070 in.)
1.85 mm (0.072 in.)
1.90 mm (0.074 in.)
1.95 mm (0.076 in.)
2.00 mm (0.078 in.)
2.05 mm (0.080 in.)
2.08 mm (0.081 in.)
2.11 mm (0.083 in.)
2.14 mm (0.084 in.)
2.17 mm (0.085 in.)
2.20 mm (0.087 in.)
2.23 mm (0.088 in.)
2.26 mm (0.089 in.)
2.29 mm (0.090 in.)
2.32 mm (0.091 in.)
2.35 mm (0.092 in.)
2.40 mm (0.094 in.)
2.45 mm (0.096 in.)
2.50 mm (0.098 in.)
2.55 mm (0.100 in.)
2.60 mm (0.102 in.)
2.65 mm (0.104 in.)
2.70 mm (0.106 in.)
NOTE:
Record measured differential side bearing preload,
because it is necessary to adjust counter shaft bearing
preload.
5) Remove differential assembly.
Counter Shaft Bearing Preload
1) After applying A/T fluid to countershaft assembly (1) and dif-
ferential assembly (2), fit them.
2) Install torque converter housing to transaxle case, then
tighten bolts to specified torque.
Tightening torque
Torque converter housing bolt: 33 N·m (3.3 kg-m, 24 lb-ft)
Identification mark
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y