Suzuki WagonR+ RB310 Service Manual page 1281

5C-4 PARKING AND REAR BRAKE
e) Pull brake drum (1) off by hand.
If it is hard to remove, use special tools.
Special tool
(A) : 09942-15510
(B) : 09943-17912
6) Remove wheel stud bolt by using hydraulic press (1).
7) Remove sensor ring (1) from brake drum (2) using special
tool (if equipped with ABS).
CAUTION:
Pull out sensor ring from brake drum gradually and
evenly. Attempt to pull it out partially may cause it to be
deformed.
Special tool
(A) : 09913-75520
(B) : 09913-65135
INSPECTION
Sensor Ring
• Check ring serration (teeth) for being missing, damaged or
deformed.
• Check sensor ring for being deformed (warped).
• Check that no foreign material is attached.
If any malcondition is found, repair or replace.