Suzuki WagonR+ RB310 Service Manual page 1280

Brake Drum
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove spindle cap (1) as shown (by hammering lightly at 3
locations around it so as not to deform or cause damage to
seating part of cap).
3) Uncalk spindle nut, remove spindle nut (1).
4) Release parking brake lever.
5) Remove brake drum.
If brake drum can not be removed easily, increase clearance
between brake shoes and drum as follows.
a) Remove console box and loosen parking brake cable
adjusting nut (1).
b) Remove adjuster cover on back plate.
c) Insert special tool through hole (2) in back plate.
Special tool
(A) : Snap-on Part No. B3404B or equivalent
d) Turn adjuster (3) with special tool in such direction as indi-
cated in figure so as to obtain larger clearance.
PARKING AND REAR BRAKE 5C-3