Suzuki WagonR+ RB310 Service Manual page 1286

INSTALLATION
1) When reinstalling brake adjuster, disassemble and thor-
oughly clean screw threads with a wire brush and apply
grease to screw threads.
Clean brake back plate and apply thin coat of grease to six
surfaces on which shoe rims rest.
"A" : Bentonite base brake grease (Anti-squeal agent)
2) Apply thinly grease between actuator and shoe rim, and at
actuator pivot point.
"A" : Bentonite base brake grease (Anti-squeal agent)
3) Assemble parts as shown in reverse order of REMOVAL.
4) Install retractor spring (1) as shown.
5) Install adjuster spring (2) as shown, with loop facing outward.
6) For procedure hereafter, refer to steps 3) to 12) of BRAKE
DRUM INSTALLATION in this section.
PARKING AND REAR BRAKE 5C-9