Suzuki WagonR+ RB310 Service Manual page 1038

Step
3 Check pressure control solenoid valve resistance
1) Turn ignition switch OFF
2) Disconnect valve body harness connector on
automatic transmission.
3) Check for proper connection to solenoid at
"BRN/YEL" and "LT GRN/RED" circuit.
4) Check resistance of pressure control solenoid.
See Fig.
Resistance between pressure control solenoid
valve terminals of transmission side valve body
harness connector:
5.0 – 5.6 Ω
Resistance between pressure control solenoid
valve terminals of transmission side valve body
harness connector and transmission body:
Infinity
Is check results satisfactory?
Fig. for Step 3.
1. Valve body harness connector on harness
2. Valve body harness connector on transaxle
3. Ground (transaxle)
Action
(at 20°C (68°F))
AUTOMATIC TRANSAXLE (M13 ENGINE MODEL) 7B1-73
Yes
Intermittent trouble or
faulty TCM. Check for
intermittent referring to
"Intermittent and Poor
Connection" in Sec-
tion 0A. If OK, substi-
tute a known-good
TCM and recheck.
5 4 3 2 1
10 9 8 7 6
1
3
No
Replace pressure control
solenoid valve or valve
body harness.
2