Subaru Impreza 2002 Service Manual page 4120

(3) Screw 6 mm dia. bolt into release fork shaft,
and remove it.
(A) Shaft
(B) Bolt
(4) Raise the release fork and unfasten release
bearing tabs to free release fork.
CAUTION:
Step (4) is required to prevent interference with
engine when removing the engine from trans-
mission.
18) Remove the pitching stopper.
ENGINE ASSEMBLY
19) Disconnect the fuel delivery hose, return hose
and evaporation hose.
CAUTION:
• Catch fuel from hose into container.
• Disconnect the hose with its end wrapped
with cloth to prevent fuel from splashing.
20) Remove the fuel filter and bracket.
21) Support the engine with a lifting device and
wire ropes.
ME(STi)-35
MECHANICAL
EN0214