An-Ln-Pt (Analog Line Port); Ringing Caused By Maintenance Testing; Error Log Entries And Test To Clear Values - Avaya G350 Maintenance Manual

AN-LN-PT (Analog Line Port)

Table 34: AN_LN_PT (Analog Line Port)
MO Name (in
Alarm Log)
AN-LN-PT
AN-LN-PT
Note: You must consult local records for the location and designation of the
equipment rack where the G350 is mounted.
The MM711 Analog Trunk and Line Media Module provides 8 ports, each of which may be administered
in any of several ways, as described in maintenance object MG-ANA.

Ringing caused by maintenance testing

Test #48 may cause some terminal equipment to ring briefly during daily maintenance. If this ringing
disturbs the customer or the terminal equipment, disable it in the Tests field of the change station
extension form. Be aware that this action also disables Tests #6, 7, and 35 on some software releases.

Error log entries and Test to Clear values

Table 35: Analog Line Error Log Entries 1 of 2
Error Aux
Type Data
0* 0
1(a) 40960
40975
40977
15(b) Any
18 0
130(c)
257(d) 40973
513(e)
Maintenance of the Avaya G350 Media Gateway
June 2004
Avaya Communication Manager controlled maintenance
Initial Command to
Alarm Level Run*
MIN test port GGGVSPP
WRN test port GGGVSPP
Associated Alarm
Test Level
Any Any
none
Audits and
Updates Test
(#36)
busy station WRN
extension
None WRN
none
Station WRN
Present Test
(#48)
AN-LN-PT (Analog Line Port)
Full Name of
MO
Analog Line Port
Analog Line Port
On/Off
Board Test to Clear Value
Any test port GGGVSpp sh r 1
ON release station extension
ON test port GGGVSpp sh
OFF test port GGGVSpp sh r 2
1 of 2
77