Connection Methods; Connect Laptop To Services Port Of S8300 - Avaya G350 Maintenance Manual

e
If
— Deselect it and click
— Or, you can leave it selected and configure your browser to bypass the proxy server
whenever you are connected to the S8300 services port as follows:
For Netscape
a
Select
b
Under Category, click
c
Click
d
If
exit.
e
If
— Select it and click
— Or, you can leave it unselected and configure your browser to bypass the proxy server
whenever you are connected to the S8300 services port as follows:

Connection methods

Connect laptop to Services port of S8300

To connect your laptop directly to the S8300 Media Server:
1
Make sure your laptop meets the hardware and software requirements.
2
Plug an Ethernet crossover cable (MDI to MDI-X) into the 10/100 BaseT Ethernet network
interface card (NIC) on your laptop.
— Crossover cables of various lengths are commercially available.
— See
needed. Crossover of the transmit and receive pairs (as shown) is required.
Maintenance of the Avaya G350 Media Gateway
June 2004
Use a proxy server for your LAN
to exit;
OK
•
Click
Advanced.
•
Type in the Exceptions box. If there are other entries in this box, add
192.11.13.6
to the list of entries and separate entries with a ";".
•
Click OK to exit.
Edit > Preferences .
Advanced
Proxies .
Direct connection to the Internet
Direct connection to the Internet
OK to exit;
•
Select Manual Proxy Configuration
•
Type 192.11.13.6 in the Exceptions box (or in the
versions of Netscape). If there are other entries in this box, add to the list of entries
and separate entries with a ";".
•
Click OK to exit.
Table 138, Crossover cable pinout chart,
Access and login procedures
is selected, you can:
.
is selected, no change is necessary; click
is not selected, you can:
and click View.
No Proxy for:
on page 254 for pinout connections if
Connection methods
Cancel to
box in later
253