Connecting An Analog Telephone - Avaya G350 Installing And Upgrading

Connecting devices
To connect two ISDN BRI stations to one ISDN port:
1. Connect each station to an RJ-45 splitter that provides two RJ-45 4-pair jacks, and one
RJ-45 male connector. See
2. Connect the male connector of the splitter to one of the ISDN ports on an MM720 Media
Module.
Figure 9: RJ-45 splitter wiring for connecting two ISDN BRI stations to one ISDN port
Figure 10: The MM720 media module

Connecting an analog telephone

This section explains how to connect an analog telephone.
To connect an analog telephone:
1. Wire a telephone port to one of the following analog ports:
- A universal analog port on an MM711 media module
- Any analog line port on a punch down block connected to an MM716 media module. To
connect the MM716 media module to a punch down block to enable telephone
connection, see
page 55.
- A LINE port on an MM714 media module
- One of the two fixed LINE ports on the G350 front panel
50 Installation and Upgrades for the Avaya G350 Media Gateway
Figure 9 for the correct wiring for the splitter.
Connecting devices to the MM717 and MM716 media modules on