add/change/display/status media gateway [x,
next]
Figure 5: Media-Gateway Administration Screen
The Avaya G350 and G700 Media Gateways Primary Server administers the Avaya G350 and G700
Media Gateways by the command
between the range of 1 to the capacity for a given primary server, and next is the next available number to
be administered.
The commands
are supported in the same manner as the
Media Gateway form fields
The Media Gateway form contains the following editable fields:
•
Number – the number of the media gateway (1 – 50)
•
Type – the type of media gateway (g350 or g700)
•
Name – a 20-character text string containing a meaningful identifier for the media gateway
•
Serial No. – the serial number of the media gateway
•
Network Region – a two or three character field specifying which IP network region the media
gateway resides in. The network region is used by the primary server to allocate resources from
the nearest Media Gateway.
The number of characters is dependent upon the type of primary server. The default is a blank
field.
•
Encrypt Link? – indicates whether the H.248 signaling link should be encrypted
•
Location – the location number of the media gateway's location
The default is one (1).
•
Site Data – a text string containing a meaningful identifier for the site
•
V1 – the only slot that can contain an S8300. It can also contain other Media Modules if there is
no S8300 in the system.
Maintenance of the Avaya G350 Media Gateway
June 2004
add media-gateway x
change media-gateway x
,
add media-gateway x
Avaya Communication Manager controlled maintenance
or
add media-gateway next
display media-gateway x
, and
command.
Maintenance commands
, where x is valid
remove media-gateway x
51