Error Log Entries And Test To Clear Values - Avaya G350 Maintenance Manual

Avaya Communication Manager controlled maintenance
DID-DS1 (Direct Inward Dial Trunk)

Error Log Entries and Test to Clear Values

Table 53: DID-DS1 Trunk Error Log Entries
Error Aux
Type Data
0* 0
1(a) Any
15(b) Any
18(c)
130(d)
257(e) 57474
57473
513(f) 57392
769(g) 57393
1793(h)
2305(i) 50944
3840(j)
*Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
**This alarm will only be raised when the System-Parameter Country form has the Base Tone
Generator field set to 4 (Italy). This alarm will be a MINOR alarm unless 75% or more trunks in
this trunk group are out of service, then the alarm will be upgraded to a MAJOR alarm.
***Major alarms may be downgraded to Warning alarms based on the value used in the set options
command.
Notes:
•
Error Type 1—DS1 Interface Media Module detects a hardware error on the DS1 DID trunk. The
Aux Data field indicates the following:
57476
57477
57485
106
Alarm
Associated Test Level
Any Any
Port Audit and
Update Test (#36)
WARNING
None WARNING
MIN/MAJ**
MIN/MAJ**
None MIN/MAJ**
Port Audit and
Update Test (#36)
On-hook before wink
On-hook before ready to receive digits
Wink too short for valid signal
Maintenance of the Avaya G350 Media Gateway
On/Off
Board Test to Clear Value
Any test trunk grp#/mbr#
OFF release trunk grp#/mbr#
ON test trunk grp#/mbr#
test board GGGVSpp
OFF
June 2004