Media Module LEDs
Media Gateway physical LEDs provide the technician with information regarding the ability to
troubleshoot the Media Module as a whole.
NOTE:
The physical LEDs provide board level status information, while the SAT provides port
level status information.
LED locations on the Media Modules
All Media Modules have three standard LEDs on the faceplate
with Standard LEDs,
(MM312, MM712, MM717), Avaya WAN (MM340, MM342), and Avaya Analog (MM711, MM714)
Media Modules, these are the only LEDs present. The Avaya T1/E1 Media Module (MM710) has an
additional LED, as shown in
Figure 17: Faceplate of Media Modules with Standard LEDs
Figure 18: T1/E1 Media Module with Fourth LED
S8300 Media Server LEDs
Figure 19: S8300 Media Server
Maintenance of the Avaya G350 Media Gateway
June 2004
on page 269). On the Avaya BRI (MM720, MM722), Avaya DCP
Figure 18, T1/E1 Media Module with Fourth LED,
G350 and Media Module LEDs
Media Module LEDs
(Figure 17, Faceplate of Media Modules
on page 269.
269