Switching The Power Unit's Supply Voltage - GRAPHTEC CUTTING PRO FC3100-60 Service Manual

5.3 Switching the Power Unit's Supply Voltage

(1) Check that the plotter's POWER switch is off.
(2) Remove the rear guide (see Subsection 4.1.2).
(3) Connect the power unit's cable to the required connector.
Voltage series
100 V
200 V
Corresponding area
UL model: USA, Japan, Asian
CE Model: Europe, Asian
5 - 3
FC3100-60 Service Manual
P/N53802-031T Rev. A
Connector
CN2
CN3