Attaching The Cutter Pen - GRAPHTEC CUTTING PRO FC3100-60 Service Manual

FC3100-60 Service Manual
P/N53802-031T Rev. A

3.5 Attaching the Cutter Pen

Warning : The tip at the cutter blade is sharp. When handling the cutter pen, be careful to avoid
injuring yourself.
(1) Loosen the screw securing the pen holder. While pressing the pen holder upward, push the cutter pen
all the way into the holder until it contacts the pen stopper.
(2) When the pen has been properly mounted, tighten the screw.
3 - 6