Removing The Control Panel Base - GRAPHTEC CUTTING PRO FC3100-60 Service Manual

4.1.4 Removing the Control Panel Base

(1) Remove the right side cover (see Subsection 4.1.1).
(2) Remove the top cover (see Subsection 4.1.3).
(3) As shown in Fig.4-10, remove the control panel base while making sure to avoid damaging the FPC
cable and other cables.
• Five M3 x L6 bind-head screws
(4) To attach the control panel base, reverse the above procedure.
Fig. 4-10
4 - 4
FC3100-60 Service Manual
P/N53802-031T Rev. A