Replacing The Y Tension Pulley - GRAPHTEC CUTTING PRO FC3100-60 Service Manual

FC3100-60 Service Manual
P/N53802-031T Rev. A

4.2.13 Replacing the Y Tension Pulley

(1) Remove the Y slider belt (see Subsection 4.2.3).
(2) Remove the Y tension pulley.
* Be careful that the Y tension pulley does not fall off when the Y slider belt is removed as shown in
Fig.4-70.
Fig. 4-70
(3) To mount the Y tension pulley, reverse the above procedure.
4 - 31