Notes On Use - GRAPHTEC CUTTING PRO FC3100-60 Service Manual

1.1.2 Notes on Use

• Make sure your computer and power sources are adequately grounded (the RS-232C interface cable
should meet the CCITT V24, EIA RS-232C standards. Graphtec's RS-232C serial interface conforms
to the EIA standard.) Inadequate grounding may result in severe damage to your plotter or computer
and constitute misuse of the plotter.
• Lubrication of the mechanisms will result in plotter malfunctions, so avoid doing so.
• To avoid scratching the cutting mat, ensure that the cutter pen's blade is not excessively extended.
• While the plotter is operating, do not touch the moving parts of the plotter.
• When manually moving the pen carriage to load the medium, be sure to move the pen carriage slowly.
1 - 2
FC3100-60 Service Manual
P/N53802-031T Rev. A