Ethernet Cable - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

Ethernet cable

When the servo amplifier is used in the motion mode, use the switching hub DT135TX (Mitsubishi Electric
System & Service) to branch a CC-Link IE Field Network.
For the wiring of CC-Link IE Field Network and CC-Link IE Field Network Basic, use a cable which meets the following
standards.
Item
Cable type
Standard
Connector
A product example on the market is as follows. For the latest product information, contact the manufacturer.
Model
*1
SC-E5EW(-L)
*1 The SC-E5EW cable is for in-enclosure and indoor uses. The SC-E5EW-L cable is for outdoor use.
11 OPTIONS AND PERIPHERAL EQUIPMENT
334
11.1 Cable/connector sets
Description
Category 5e or higher, (double shielded/STP) straight cable
One of the following standards must be met.
• IEEE802.3 1000BASE-T
• ANSI/TIA/EIA-568-B (Category 5e)
RJ-45 connector with shield
Manufacturer
Mitsubishi Electric System & Service Co.,
Ltd.
Contact
Please consult your local Mitsubishi Electric representative.