Brake Unit Parameter Setting - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

Brake unit parameter setting

Whether a parameter can be changed or not is listed below.
Parameter
No. Name
0 Brake mode switchover
1 Monitor display data selection
2 Input terminal function selection 1
3 Input terminal function selection 2
77 Parameter write selection
78 Cumulative energization time carrying-over times
CLr Parameter clear
ECL Alarm history clear
C1 For manufacturer setting
11 OPTIONS AND PERIPHERAL EQUIPMENT
354
11.3 FR-BU2-(H) brake unit
Change Remark
possible/
impossible
Impossible Do not change the parameter.
Possible Refer to the FR-BU2 Instruction Manual.
Impossible Do not change the parameter.