Mr-D05Udl3M-B Sto Cable; Ethernet Cable - Mitsubishi Electric MR-J5 Series User Manual

MR-D05UDL3M-B STO cable

This cable is for connecting an external device to the CN8 connector.
Cable model
MR-D05UDL3M-B
Configuration diagram
MR-D05UDL3M-B
CN8
Internal wiring diagram
*1
Yellow (dots: black)
Yellow (dots: red)
Gray (dots: black)
Gray (dots: red)
White (dots: black)
White (dots: red)
*1 Do not use the two core wires with orange insulators (with red or black dots).

Ethernet cable

For the wiring of CC-Link IE TSN, use a cable that meets the following standards.
Item
Cable type
Standard
Connector
A commercially available product example is as follows. For the latest product information, contact the manufacturer.
Model Manufacturer
*1
SC-E5EW(-L) Mitsubishi Electric System & Service Co.,
Ltd.
*1 The SC-E5EW cable is for in-cabinet and indoor uses. The SC-E5EW-L cable is for outdoor use.
For cables other than SC-E5EW(-L), refer to the CC-Link Partner Association website (https://www.cc-link.org/en/).
Precautions
• When branching the CC-Link IE TSN network using a switching hub, use a switching hub (Class B) that is recommended by
the CC-Link Partner Association. Although a switching hub (Class A) can also be used, there are restrictions on the type of
topology that can be used. For details, refer to the motion product manual.
Cable length
3 m
1
2
3 STOCOM
4 STO1
5 STO2 Viewed from the connection part.
6 TOFB1
7 TOFB2
8 TOFCOM
Plate
Shield
Description
Category 5e or higher, (double shielded/STP) straight cable
One of the following standards must be met.
• IEEE802.3 1000BASE-T
• ANSI/TIA/EIA-568-B (Category 5e)
RJ-45 shielded connector
Contact
Please consult your local Mitsubishi Electric representative.
Application
Connection cable for the CN8 connector
CN8 connector
2 4 6 8
1 3 5 7
6 OPTIONS AND PERIPHERAL EQUIPMENT
135
6.1 Cable/connector sets
6