Without Regenerative Resistor - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

Without regenerative resistor

Summary
This section explains servo amplifiers without a regenerative resistor. The things not explained in this section will be the same
as MR-J4-_GF_(-RJ).
Model
The following describes what each block of a model name indicates. Not all combinations of the symbols are available.
M R - J 4 - 1 1 K
Series
Specifications
Indicates a servo amplifier of 11 kW to 22 kW that does not use a regenerative resistor as standard accessory. When using
any of these servo amplifiers, always use the MR-RB5R, MR-RB9F, MR-RB9T, MR-RB5K-4, or MR-RB6K-4 regenerative
option.
APPX
622
Appendix 10 Special specification
G F 4 - P X
Special specifications
Symbol
PX
RZ
Power supply
Symbol
None 3-phase 200 V AC to 240 V AC
4 3-phase 380 V AC to 480 V AC
Rated output
Symbol Rated output [kW]
11K
15K
22K
Special specifications
MR-J4-_GF_ without regenerative resistor
MR-J4-_GF_-RJ without regenerative resistor
Power supply
11
15
22