MR-BAT6V1BJ battery for junction battery cable
• MR-BAT6V1BJ is compatible only with HG series servo motors. It cannot be used with direct drive motors.
• MR-BAT6V1BJ cannot be used for fully closed loop system.
• When MR-BAT6V1BJ is mounted on the MR-J4-500GF(-RJ), the front cover does not open. For this reason,
carry out wiring to the terminal block before mounting MR-BAT6V1BJ.
• For using the MR-J4-350GF4(-RJ), contact your local sales office.
Parts identification and dimensions
Orange: Connector for servo amplifier
Black: Connector for branch cable
Production year and month of batteries
Production year and month are indicated in a serial number (SERIAL) on the rating plate. The second digit from left in the
number indicates the first digit of the dominical year, the third digit from left indicates a month (Oct: X, Nov: Y, Dec.: Z). For
November 2013, the Serial No. would be "SERIAL: _ 3Y _ _ _ _ _ _".
Specification list
Item
Description
2CR17335A (CR17335A 2 pcs. in series)
Battery pack
Nominal voltage [V]
6
Nominal capacity [mAh]
1650
Storage temperature []
0 to 55
Operating temperature []
0 to 55
Lithium content [g]
1.2
Mercury content
Less than 1 ppm
Dangerous goods class
Inapplicable to the dangerous goods (Class 9)
Page 569 Handling of AC servo amplifier batteries for the United Nations Recommendations on the Transport of
Dangerous Goods
Operating humidity and
5 %RH to 90 %RH (non-condensing)
storage humidity
*1
Battery life
5 years from date of manufacture
Mass [g]
66
*1 Quality of the batteries degrades by the storage condition. The battery life is 5 years from the production date regardless of the
connection status.
34.8
Case
[Unit: mm]
69.3
Rating plate
Mass: 66 [g]
11 OPTIONS AND PERIPHERAL EQUIPMENT
11
389
11.8 Battery