Optical Communication Cable Specifications - Mitsubishi Electric MDS-D-SPJ3 Specification Manual

MITSUBISHI CNC
5 Dedicated Options

5-5-3 Optical communication cable specifications

(1) Specifications
Cable model
Specification application
Cable length
Minimum bend
radius
Tension strength
Temperature
range for use
(Note1)
Ambient
Cable
appearance
Optical [mm]
communication
cable
Connector
appearance
[mm]
(Note1) This temperature range for use is the value for optical cable (cord) only. Temperature condition for
the connector is the same as that for drive unit.
(Note2) Do not see directly the light generated from CN1A/CN1B connector of drive unit or the end of cable.
When the light gets into eye, you may feel something is wrong for eye.
(The light source of optical communication corresponds to class1 defined in JISC6802 or
IEC60825-1.)
5 - 54
G396-L□M
For wiring inside panel
0.3, 0.5, 1.0, 2.0, 3.0, 5.0m
25mm
140N
-40 to 85°C
4.4 ± 0.1
(6.7) (15) (13.4)
Protection tube
37.65
G380-L□M
For wiring outside panel
For long distance wiring
5.0, 10, 12, 15, 20, 25, 30m
Enforced covering cable: 50mm
cord: 30mm
980N
(Enforced covering cable)
-20 to 70°C
Indoors (no direct sunlight)
No solvent or oil
4.4 ±
7.6 ±
22.7
0.4
0.5