Configuration Of The Programming Pendant; Programming Pendant - YASKAWA Motoman GP8 EduCart System Manual

GP8 EduCart
6

Configuration Of The Programming Pendant

6.1
6 Configuration Of The Programming Pendant

6.1 Programming Pendant

Programming Pendant
1. Press the {I/F Panel} on the Programming Pendant display.
2. Place the "OPERATION" switch to "PERM" by pressing the
[INTERLOCK] key on the keypad and pressing the "OPERATION"
switch on the display of the Programming Pendant.
3. To set up an interface with the "Input *** Control" switch press the
[INTERLOCK] key on the keypad and pressing the "Input *** Control"
switch on the display of the Programming Pendant and observe the
input status changes.
6-1
186638-1CD
186638-1CD
52 of 88