7.11 Checking The Assignment Of The Resource File For Errors - Siemens SIMATIC S5 Series Manual

7.11 Checking the Assignment of the Resource File for Errors

Testing the 1. Open a new file of the type *.S5K with the keyboard editor
Resource File
2. Save without any changes with File
3. Close the window with ALT + F3.
4. Open the same file again.
Result: if no error occurs when the file is read, the assignment is
correct.
If an error occurs, check whether any key combinations are
occupied by two or more assignments.
Working with S5-DOS/ST
C79000-G8576-C760-03
menu File Open Enter file name.
Keyboard Editor
Save.
7-15
7