Operation; User Modes; Normal Mode - KROHNE OPTIFLEX 8200 C Handbook

OPTIFLEX 8200 C/F/S

6.1 User modes

Normal mode

Normal mode
Normal mode Normal mode
Configuration mode Configuration mode Configuration mode Configuration mode
6.2 Normal mode
This mode shows measurement data. Use the table that follows:
• for the selection of the measurement type (distance, level, sensor temperature, converter
temperature, output, percentage output, dielectric gas, dielectric product and conversion)
and
• for the selection of the measurement units
Some measurement types will only be available if the device has the correct parameters entered
in the configuration mode.
Keypad functions
Button
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
This mode displays measurement data. For more data, refer to
mode on page 71.
Use this mode to view parameters, create tables for volume or mass
measurement, and change critical values to measure in difficult process
conditions. To get access to supervisor menu refer to
device settings
Function description
Description Standard function
Right Enter configuration mode.
Return / Change the measurement units.
Escape
Down Change the measurement type.
Up Change the measurement type.
www.krohne.com
on page 102. For more data on menu items, refer to
on page 79.
Software versions installed on
the device (converter firmware
version, sensor firmware version
and the HMI (device display
screen) firmware version)
Enter Auto Setup menu. Enter
the supervisor password. You can
set the time, date, probe length,
tank height, tank type,
application type, top product
data, current output function,
4 mA value and 20 mA value.
Setup summary (output function,
4 mA value, 20 mA value and
output range). Push [> > > > ] again and
again to read the installation
summary, application summary
and probe summary. Push [ ] or
[ ] to scroll up or down the list.
Push [> > > > ] again to go back to
normal mode.
Enter the display language menu.
Enter the supervisor password.
You can change the display
screen language.

OPERATION

6
Normal
Protection of the
"Hot key" function
71