ELECTRICAL CONNECTIONS
4
Terminals for electrical installation (one current output and one switch output - relay)
Figure 4-3: Terminals for electrical installation (one current output and one switch output - relay)
1 Current output 1: Terminals
2 Switch power supply: Terminals
3 Switch output - relay: Terminals
4 Location of the external grounding terminal (at the bottom of the converter)
5 Grounding terminal in the housing (if the electrical cable is shielded)
CAUTION!
Use the applicable electrical cables with the cable glands.
•
Current output:
Current output: Make sure that the current is not more than 4 A or that there is 4 A-rated
•
Current output:
Current output:
fuse in the electrical circuit that energizes the device.
Switch output - relay: Make sure that the current is not more than 6 A or that there is 6 A-
Switch output - relay:
Switch output - relay:
Switch output - relay:
•
rated fuse in the electrical circuit that energizes the device.
Make sure that the polarity of the power supply is correct. If the polarity is incorrect, you will
•
not cause damage to the device but the device will not operate.
50
www.krohne.com
OPTIFLEX 8200 C/F/S
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en