OPTIFLEX 8200 C/F/S
OPTIFLEX 8200 F – Remote version
Figure 2-3: Scope of delivery (OPTIFLEX 8200 F – Remote version)
1 Signal converter
2 Probe segments. For the assembly procedure of the single rod probe refer to
(single-piece probe)
option, only part of the probe is attached to the device. For the assembly procedure of the segmented single rod probe,
How to assemble the single rod probe (segmented probe)
refer to
The assembly instructions and small parts are in a bag attached to the signal converter.
3 Quick Start
4 DVD-ROM. This contains the handbook, the quick start, the technical data sheet and related software.
5 Strap wrench
6 RS-485 cable. A signal cable connects the signal converter to the probe electronics housing. This signal cable is sup-
plied on request. For more data about the signal cable, refer to
7 Probe electronics housing, process connection and probe (if supplied with the applicable probe option)
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
on page 31. If a single rod or coaxial probe is attached and you ordered the "segmented probe"
www.krohne.com
DEVICE DESCRIPTION
How to assemble the single rod probe
on page 35.
Remote device data
on page 56.
2
15