OPERATION
6
Values in menu items
Figure 6-3: Values in menu items
1 Menu item with values stored at this time (first screen)
2 Push [> > > > ] again to change the values. A cursor shows on the first digit.
3 Menu item name
4 Cursor on the selected digit
This is what you see when you select a menu item that has a value. The functions of the buttons
are given in the table that follows:
Function of buttons in menu items that have values
Button
How to save settings changed in the advanced setup menu (menu 1.0.0) and the
supervisor menu (menu 2.0.0)
• When you have changed parameters in all the necessary menu items, push [^ ^ ^ ^ ] to accept the
new parameter.
• Push [^ ^ ^ ^ ] to go back to the "STORE" screen.
• The device will ask you to save or cancel your settings. Push [ ] or [ ] to select STORE YES
STORE NO. Push [^ ^ ^ ^ ] to accept or reject the new settings.
STORE NO
STORE NO
STORE NO
i
The display goes back to Normal mode.
78
Description
•
Right
Enter the menu item and see the value stored at this time.
•
Enter the menu item configuration level to change the value.
•
Move the cursor to the next digit on the right. If the cursor is on the
last digit, push [> > > > ] again to go back to the first digit.
Enter /
Accept the value and go back to the sub-menu.
Esc (Escape)
Down
Decrease the digit value.
Up
Increase the digit value.
www.krohne.com
OPTIFLEX 8200 C/F/S
Function
STORE YES or
STORE YES
STORE YES
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en