KROHNE OPTIFLEX 8200 C Handbook page 80

OPERATION
6
Menu Function
No.
Probe Length
Installation Type
Tank Height
Stilling Well
Height
Internal Diameter The internal diameter of the stilling
Application Type
Epsilon R
Product
80
Function description
Probe length is the distance from the
flange face / thread stop of the device
down to the bottom end of the probe
(including counterweight for cable
versions).
The conditions in which the device is
used. If the device is installed on a
tank, set this step to "TANK". If the
device is installed in a stilling well or
bypass chamber, set this step to
"STILLING WELL / BYPASS".
The distance from the tank connecting
flange face / thread stop down to the
tank bottom.
If Installation Type Installation Type is set to "STILLING
Installation Type Installation Type
WELL / BYPASS", Tank Height Tank Height Tank Height is Tank Height
replaced by two steps: Stilling Well Stilling Well Stilling Well Stilling Well
Height and Internal Diameter Height Internal Diameter.
Height Height Internal Diameter Internal Diameter
The distance from the tank connecting
flange face / thread stop down to the
bottom of the stilling well or the
bottom process connection of the
bypass chamber. This function
replaces Tank Height Tank Height. It is available if Tank Height Tank Height
Installation Type is set to "STILLING Installation Type
Installation Type Installation Type
WELL / BYPASS".
well or bypass chamber. It is available
if Installation Type Installation Type is set to "STILLING Installation Type Installation Type
WELL / BYPASS".
This function tells the device what to
look for in the tank and what to do with
the measurement signals.
If the device has the Dynamic Gas- Dynamic Gas- Dynamic Gas- Dynamic Gas-
phase Compensation phase Compensation phase Compensation (DGC) option, the phase Compensation
device will do a process analysis to
measure the dielectric constant of the
gas above the product in the tank.
This is the dielectric constant of the top
product.
If Epsilon R Product is "Known"
If Epsilon R Product is "Unknown".
What is the product family?
www.krohne.com
OPTIFLEX 8200 C/F/S
Selection list or range of
values
min:
2.3.2 Blocking Distance + 3.1.1
Counterweight
max:
Probe length depends on the
measuring range for each type
of probe. For more data about
Technical
probe length, refer to
data on page 147 (Probe
options / Measuring range).
TANK, STILLING WELL / BYPASS TANK
min-max: 0.0...99999 mm
min-max: 0.0...99999 mm
min-max: 40...1000 mm
LEVEL,
LEVEL + INTERFACE MIXED,
LEVEL + INTERFACE UNMIXED,
INTERFACE (FULLY
SUBMERGED PROBE)
Known, Unknown
min-max: 1....115
ACIDS, ALCOHOL, BASE,
HYDROCARBON, LIQUID GAS,
MINERAL OIL, SOLVENT,
WATER-BASED, OTHER
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
Default
This value
is given in
the
customer
order
25000 mm
25000 mm
200 mm
LEVEL
67.5
OTHER