KROHNE OPTIFLEX 8200 C Handbook page 139

OPTIFLEX 8200 C/F/S
Figure 7-3: Parts of the device (refer to "Parts list" table)
Procedure: how to disassemble the remote version
• Remove the housing base (8) and the parts attached to the housing base. Remove the PCB (12)
• Remove the probe electronics housing (32) and the parts attached to the probe electronics
housing. Remove the PCB (31)
• If the device has an Ex d approval or the second output option, remove the Ex d housing (23)
and the parts contained in the Ex d housing. Remove the PCB (30)
• Remove the housing wall support (28) and the parts attached to the housing wall support.
• If the device has the display screen option, remove the housing cover (21) and the parts
attached to the housing cover. Remove the PCB (20)
• Remove the PCB (17)
• If the device has an Ex d approval or the second output option, remove the Ex d housing (23)
and the parts contained in the Ex d housing. Remove the PCB (24)
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
PCB (31).
PCB (31) PCB (31)
PCB (17) from the "T" housing (16).
PCB (17) PCB (17)
www.krohne.com
PCB (30) from the Ex d housing. PCB (30) PCB (30)
PCB (20) and the attached display screen
PCB (20) PCB (20)
PCB (24) from the Ex d housing. PCB (24) PCB (24)
SERVICE
7
PCB (12). PCB (12) PCB (12)
display screen.
display screen display screen
139