KROHNE OPTIFLEX 8200 C Handbook page 83

OPTIFLEX 8200 C/F/S
Menu Function
No.
Is your tank
partially filled or
empty?
Snapshot...
Store
configuration...
1 "INTERFACE LEVEL", "INTERFACE CONVERSION", "INTERFACE DISTANCE", "INTERFACE DIST. CONV.", "LAYER" and "LAYER CON-
VERSION" are only available if you included the Interface Capability option in the customer order. You must also set Application Type
to "LEVEL + INTERFACE MIXED", "LEVEL + INTERFACE UNMIXED" or "INTERFACE (FULLY SUBMERGED PROBE)". "LEVEL CONVER-
SION", "DISTANCE CONV.", "INTERFACE CONVERSION", "INTERFACE DIST. CONV." and "LAYER CONVERSION" are only available if
you made a conversion table (strapping table).
2 Units and range depend on the output function, length unit and volume unit selected
3 This depends on the data given in the customer order
4 "CURRENT" and "RELAY" are only available if a second output option is in the customer order
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
Function description
It is necessary to give this data to tell
the device where to do a scan for
interference signals along the probe
(snapshot). We recommend that the
tank is empty when you do the scan.
www.krohne.com
OPERATION
Selection list or range of
values
Partially, Empty
6
Default
—
83