TECHNICAL DATA
8
Coaxial probe
Figure 8-10: Measurement limits: coaxial probe
1 Device with a coaxial probe
2 Top dead zone:
Top dead zone: Top part of the probe where measurement is not possible
Top dead zone:
Top dead zone:
3 Top non-linearity zone:
Top non-linearity zone: Top part of the probe with a lower accuracy of ±30 mm / ±1.18¨
Top non-linearity zone:
Top non-linearity zone:
4 Bottom non-linearity zone:
Bottom non-linearity zone:
Bottom non-linearity zone:
Bottom non-linearity zone: Bottom part of the probe with a lower accuracy of ±30 mm / ±1.18¨
5 Bottom dead zone:
Bottom dead zone:
Bottom dead zone:
Bottom dead zone: Bottom part of the probe where measurement is not possible
6 Gas (Air)
Gas (Air)
Gas (Air)
Gas (Air)
7 Product
Product
Product
Product
8 L, Probe length
L, Probe length
L, Probe length
L, Probe length
9 Tank Height
Tank Height
Tank Height
Tank Height
10 Minimum distance from the probe to a metallic tank wall:
Minimum distance from the probe to a metallic tank wall: Coaxial probe = 0 mm / 0¨
Minimum distance from the probe to a metallic tank wall:
Minimum distance from the probe to a metallic tank wall:
162
www.krohne.com
OPTIFLEX 8200 C/F/S
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en