KROHNE OPTIFLEX 8200 C Handbook page 201

Guided radar (tdr) level transmitter for liquids at high temperature and pressure
Hide thumbs Also See for OPTIFLEX 8200 C:
Table of Contents

Advertisement

OPTIFLEX 8200 C/F/S
VFAC
VFAC
4
0
VFAC
VFAC
1 For more data, refer to the Technical data section (Approvals and certification)
2 If the device has a ceramic process seal system and a Kalrez® gasket, then T*= T1. For all other versions in Gas Groups, T* = T3. If the
device has a ceramic process seal system and a Kalrez® gasket, then T*°C = T315°C. For all other versions in Dust groups, T*°C =
T150°C.
3 If the device has a ceramic process seal system and a Kalrez® gasket, then T*= T1. For all other versions, T* = T3.
4 Length of the RS-485 cable between the remote converter and the probe electronics housing: 1...100 m / 3.28...328.08 ft
5 Length of the 50-ohm cable between the probe electronics housing and the probe: refer to "Sensor extensions" in this table
6 This option is available if the device has one output
7 This option is available if the device has two outputs
8 If no language is selected or selected language is not available, English language documentation will be delivered
9 Other flange faces are available. Refer to your local supplier for more data.
10Do not use with the coaxial probe
11Flanges with RF faces have a slip on-type design with an anti-blowout feature. Other flange faces are available. Refer to your local
supplier for more data.
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
Calibration certificate
Calibration certificate
Calibration certificate
Calibration certificate
0
Without (accuracy ±2 mm (0.08¨) up to 10 m
(32.81 ft))
1
Calibration certificate ±2 mm (0.08¨),
2 factory default points
2
Calibration certificate ±2 mm (0.08¨),
5 factory default points
3
Calibration certificate ±2 mm (0.08¨),
5 points specified by customer
Options
Options
Options
Options
0
1
www.krohne.com
APPENDIX
Without
With BM26 A
Accessories / Tag plate
Accessories / Tag plate
Accessories / Tag plate
Accessories / Tag plate
0
Without
1
Weather protection
2
Adaptor for OPTIFLEX 1300 process
connections (before June 2009)
3
Stainless steel tag plate
(18 characters max.)
6
Weather protection + stainless steel
tag plate (18 characters max.)
Order code
Order code
Order code
Order code
10
201

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiflex 8200 fOptiflex 8200 s

Table of Contents