DEVICE DESCRIPTION
2
OPTIFLEX 8200 S – Sensor extension with compact version
Figure 2-2: Scope of delivery (OPTIFLEX 8200 S – Sensor extension with compact version)
1 Signal converter
2 Sensor extension: Coaxial cable
3 Sensor extension: Wall bracket
4 Process connection and probe (if supplied with the applicable probe option)
5 Probe segments. For the assembly procedure of the single rod probe, refer to
(single-piece probe)
option, only part of the probe is attached to the device. For the assembly procedure of the segmented single rod probe,
How to assemble the single rod probe (segmented probe)
refer to
The assembly instructions and small parts are in a bag attached to the signal converter.
6 Quick Start
7 DVD-ROM. This contains the handbook, the quick start, the technical data sheet and related software.
8 Strap wrench
14
on page 31. If a single rod or coaxial probe is attached and you ordered the "segmented probe"
www.krohne.com
OPTIFLEX 8200 C/F/S
How to assemble the single rod probe
on page 35.
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en