KROHNE OPTIFLEX 8200 C Handbook page 208

APPENDIX
10
XFAC XFAC XFAC XFAC 4 0 0 0 0
1 Do not use with double rod, double cable and Ø8 mm / 0.32¨ single cable probes
2 Other flange faces are available. Refer to your local supplier for more data.
3 Do not use with the coaxial probe
4 Flanges with RF faces have a slip on-type design with an anti-blowout feature. Other flange faces are available. Refer to your local sup-
plier for more data.
DANGER!
Remote version: Make sure that replacement signal cables for Ex-approved devices are supplied
by the manufacturer. Use of this signal cable is mandatory.
208
0 0 0 0 0 0
www.krohne.com
Alternative flange faces Alternative flange faces
Alternative flange faces Alternative flange faces
5 Type E, EN 1092-1 (Spigot)
B FF, ASME B16.5 (Flat face)
0 Options Options
Options Options
0 Without
1 With BM26 A
Accessories / Tag plate Accessories / Tag plate Accessories / Tag plate Accessories / Tag plate
0
1
2
3
0 0
06/2018 - 4006448901 - MA OPTIFLEX 8200 R01 en
OPTIFLEX 8200 C/F/S
Without
Weather protection
Adaptor for OPTIFLEX 1300 process
connections (before June 2009)
Stainless steel tag plate
(18 characters max.)
Order code Order code Order code Order code