Changing The Language Setting; Step 4: Making Adjustments - Sony HANDYCAM DCR-DVD610 Operating Manual

s÷t_i_+j th+ date a_d tim÷/¢+_fi_ued/
0 Notes
• n you do not use your cmncorder l_r about 3
months, tim built-in rechm'geable baucJy gets
discharged and file date and time settings may
be cleared lrom the memol T. In that case,
charge the buih-in rechargeable battely and then
_t the date and time again (p+ 124).
• It kJkes a li:w seconds lin" your c_uncorder to be
ready to shoot al_er the power is turned on. You
cannot operate your camcorder during this time.
• hi the delinflt setting, the power turns (ill
automatically if you leave your eamcorder
unoperaled li_wapproximatcly 5 minutes, l_ save
baltel T power ([A.SHUT OFFI+ p. 89).
"_° Tips
• Tile date and lime does not aplx:ar during
recording, but they are aulonmfically recorded
on the media, and can be displayed dinting
playback ([DATA CODE], p. 84).
• See page 115 lor inli_wlnation concerning
"World time difl_rence."
• [l tile billions Oll tile touch panel do not work
correctly, adjust the touch panel
([CALIBRATION], p. 122).
You can change the on-screen displays to
show messages in a speei£ied language.
Touch _" (HOME) --,- _ (SETTINGS/
-+ ICLOCK/{_] LANGI -+
[{_] LANGUAGE SET], then select the
desired langtmge.
Step 4: Making
adjustmentsbefore
recording
Slide tile LENS COVER switch to OPEN.
After recording, set the LENS COVER
switch to CLOSE to close lhe lens co'+er.
Open tile LCD panel 90 degrees to tile
camcerder (@h then relate it te the best
angle to recerd or play (@).
@90 degrees to the
camcorder
@90 degrees
(max.)
26
@180 degrees DISP/BATT INFO
(max.)
I0 torn 0If the LCD backlight t0 make
the battery last longer
(DCR-DVD710/DVD810)
Press and hold DISP/BATT INFO lkn" a few
seconds until _12"do_ a ppears.
This setting is practical when you use your
eameerder in bright conditions or you want