Setting The Knife Fold Section - Horizon Fitness AFC-566F Manual

3-8

Setting the Knife Fold Section

Check the knife stoppers.
- When not doing knife folding, remove the knife
stoppers.
- When doing knife folding, install the knife stop-
pers.
When the sheet width is less than 95 mm
(3.8"), attach the knife side guide for small
sheets at the positions indicated on the Setup-
Guide - Buckle Screen.
Setup - Guide - Buckle Screen
When performing parallel folding
- Set the transport rollers.
- Install these rollers in positions where they pre-
vent the sheets from lifting, so the sheets move
smoothly.
When performing knife folding
- Loosen the locking screw and remove the trans-
port roller.
Side Guide
23051
10209E1
23051
30801B1
Only when the sheet width is less than 95
mm (3.8"):
Match the arrow with
the scale
Transport Rollers
Parallel Folding Knife Folding
Loosen this screw (4mm)
and move the transport
roller.
23051
30801A1
Loosen
23051
30801C1
53