Setting The Perforation Blades And Scoring Blades - Horizon Fitness AFC-566F Manual

4-7

Setting the Perforation Blades and Scoring Blades

If you will be doing perforating and scoring, follow the
steps listed below.
If you will not be doing perforating and scoring, go to
page 74.
If you perform the perforation or scoring with
the unfolded sheet,the perforation or scoring
line may not run straight.
Press Setup Mode on the Setup-
Guide - Buckle screen.
The Feed Start button blinks.
Press the Feed Start button once.
The motor starts, and the feed rotor and fold roll-
ers turn.
Press the Test Feed button once,
and press the Feed Stop button
immediately.
- One sheet feeds, and stops in the register guide
section.
Press the Emergency Stop button.
Open the safety cover.
Move the sheet to a point just before
the perforation shaft using the hand-
wheel.
WARNING
- Press the Emergency Stop button before starting
this operation. Otherwise, the machine may start
suddenly causing severe personal injury.
- Do not touch the blades.
- Wear cutting proof gloves while doing this opera-
tion.Otherwise, a sharp blade can cause severe
personal injury.
Perforation Shaft
Handwheel
23051
40701A1
23051
40701B1
2
1
23051
40701C1
23051
40701D1
71