Loading The Sheets On The Table - Horizon Fitness AFC-566F Manual

3-4

Loading the Sheets on the Table

Lower the feed table.
- Press the Feed Table Down button on the con-
trol panel. The table will lower.
The table can be stopped from lowering by
pressing the Feed Table Up button while the
table is moving.
Raise the suction head bar and support.
- Put the notch of the support over the rod.
Support Locking Bar
Load the sheets on the table.
Fan the sheets correctly. Load the sheets so
they are aligned with the table guide. Align the
head edge of the stack with the feed head.
The maximum stack height is 740 mm (29.1").
The maximum stack weight is 250 kg / 551 lb.
When you load the coated papers of 545 x 788 mm / 21.5"
x 31.0" at the maximum, the weight is about 330 kg / 726.9
lb. Be careful not to exceed the maximum load.
Lower the suction head bar.
- Lift the suction head bar a little, turn the support
locking bar, raise the stay and lower the suction
head bar.
WARNING
When lowering the suction head bar, be care-
ful not to catch your finger.
Support
Suction Head Bar
23051
Feed Head
Align the corner
23051
30401A1
Table Guide
23051
30401C1
43