Horizon Fitness AFC-566F Manual page 79

4-6 Matching the Perforation Line to the Fold Knife
B: If not doing perforating
Check that the desired fold position (register mark)
matches the fold knife.
Feed one sheet using Setup Mode.
- The sheet stops just before it is inserted into the
fold knife section.
Move the sheet to the knife stopper
using the Normal Jog button.
Check that the desired fold position
is aligned with the knife by viewing
from point A as shown in the draw-
ing for step 2.
If the fold line is shifted to parallel
direction
-Adjust the feeding position of the sheet using the
screen.
When the register guide position is adjusted,
positions of the knife guide (front and rear)
are also adjusted automatically.
1
Knife Stopper
Desired Fold Position
(Register Mark)
Setup - Guide - Buckle Screen
2
3
23051
40601F
23051
40601G1
23051
40601H1
23051
40601I1
69