Adjusting Parallel Shifts In Parallel Folding; Adjusting The Positions Of The Buckle Stoppers Separately - Horizon Fitness AFC-566F Manual

4-5

Adjusting Parallel Shifts in Parallel Folding

4-5-1 Adjusting the positions of the buckle stoppers separately

If the fold position shifts by the same amount on the
front and rear, adjust the buckle stopper position.
Change the value for buckle 1
through buckle 6 on the Setup-
Guide-Buckle screen.
Each time you press the
the stopper position changes. Once the value
has been entered using the numeric keys,
press to adjust all the stoppers at
once.
When changing the setting for buckle
stopper after the sheet number in roller
gap has been changed in Roller Gap
screen, use the Micro-Adjusting buttons.
If the value is changed using Numeric
Keypad screen, the roller gap is recalcu-
lated and the sheet number entered in
Roller Gap screen may be returned to
the default value.
If you will not be doing knife folding, all the adjust-
ments are finished.
Check that the knife stopper rises, and go to
Chapter 5. When you will be doing knife folding,
go to section 4-1.
or buttons,
23051
40501B
Setup - Guide - Buc kle Screen
23051
40401G1
65