Maintenance; Cleaning The Vacuum Piston - Horizon Fitness AFC-566F Manual

This section includes instructions for cleaning up the machine,
replacing consumables, and lubrication.
- Press the Emergency Stop button before doing any maintenance operation. Otherwise, a sudden start of the
machine can cause severe personal injury or machine trouble.
7-1

Cleaning the Vacuum Piston

If paper dust sticks to the vacuum piston, the vacuum
piston will not move smoothly. Disassemble and clean it.
If the piston set screw breaks, replace it with the
accessory piston set screw in the same way.
Remove the vacuum piston.
(1) Loosen the locking nuts.
(2) Loosen the piston set screws.
(3) Pull out the vacuum piston.
- Pull out both springs.
Clean the vacuum piston.
- Clean the inside of the piston and the holes in
the suction head using compressed air.
If it is difficult to remove the dirt on the vacuum
piston, wipe with alcohol or kerosene.

7. Maintenance

WARNING
Piston Set
Screw
CAUTION
-Do not lubricate the piston. The lubricating oil
will catch more paper dust.
- Do not hit or scratch the piston.
CAUTION
- Keep the suction cups away from kerosene or
oil to prevent them from deteriorating.
Lock Nut
Clean this hole using
compressed air.
Spring
23051
70101A1
Blow out the paper dust
using compressed air.
Wipe using a dry cloth.
23051
70101B1
123