Starting And Running The Job; Setup The Main Screen; Setup The Function Screen - Horizon Fitness AFC-566F Manual

5. Starting and Running the Job

This section includes instructions for starting and running the job after
completing section 3, "Basic Setup" and section 4, "Fine Tuning Adjustments."
5-1

Setup the Main Screen

5-1-1 Setup the Function Screen

Set the number of remaining sheets
only when you want to display the
remaining time to run.
- The remaining time to run is automatically
calculated depending on the production
speed and the number of remaining sheets.
- Even the number becomes "0", the
machine will not stop feeding.
If necessary, clear the total counter to "0."
C
- Press to clear the counter.
Set up the preset function.
1. :The machine continues running
sheets until the Feed Stop button is
pressed. (The preset function is not
used.)
###
: The machine stops and sounds the
buzzer after feeding the preset num-
ber of sheets. The machine remains
stopped until the Feed Start button is
pressed.
###
: The machine stops and sounds the
buzzer after feeding the preset num-
ber of sheets. The machine resumes
running the sheets after a short pre-
set time delay.
(the pause function) is not available while
###
the optional TST-37 Press Stacker is connected.
2. If or
###
###
number.
If is selected,
###
3. set the pause time. The pause time can be set
up to 9.9 sec.
4. Set the batch counter. The machine stops after
completing the preset number of batch sets. If
you enter "0", the machine continues running
the job including the pause time feature.
is selected, set the preset
Main-Function Screen
2
3
4
1
23051
50101A1
91