Control Panel - Horizon Fitness AFC-566F Manual

1-1 Machine Description

1-1-16 Control Panel

Touch Panel
This panel is used to control the machine.
16
Motor Stop/Feed Stop Button
If this button is pressed once while folding operation, the machine
stops the feeding. If the button is pressed again, the motor stops.
Motor Start/Feed Start Button
If the button is pressed once while the feed table Up button is lit,
the motor runs. If it is pressed again, a sheet is moved into the
fold section for the folding operation. This button lights while the
sheets are feeding and blinks in the Setup mode.
Page 19-31
Test Feed Button
While the transport motor is running, press this button
to feed one sheet.
Remote Control Signal Receiver
Reverse Jog Button
When this button is pressed, the sheets move in the
reverse direction.
Normal Jog Button
When this button is pressed, the sheets move in the
normal direction.
Feed Table Down Button
When this button is pressed, the feed table starts to lower until it
comes to the table sensor position.
Press the button again, and the table lowers to the lowest point. If
the Down button is pressed while the table is rising, the table stops
rising.
Feed Table Up Button
When this button is pressed, the feed table raises and stops at
the upper limit and the vacuum pistons lower.
If the Up button is pressed while the table is lowering, the table
stops lowering.
1-1-16
Control Panel
If the Motor Stop/Feed
Stop button is pressed
twice in short period,
the machine stops while
the sheets are left inside.
Stop the motor after all
sheets inside the
machine are delivered.
23051
10116A1