Set Up - Check/Instruction Screen - Horizon Fitness AFC-566F Manual

1-2 Touch Panel Description

1-2-10 Set Up - Check/Instruction Screen

Before each mechanism is setup automatically to match the fold pattern and sheet size, the Check/Instruc-
tion screen appears. This lists the parts on the machine that must be checked before changeover.
Check Item
(1) Check that all the
sheet guides are
removed.
(2) Lower the feed table.
(3) Set the knife fold stop-
per and lower it.
Remove or raise the
knife fold stopper.
(4) If the distance from
the knife to the side
edge of the sheet is
less than 95 mm
(3.8"), install the front
and rear side guides
at the positions
shown.
23051
10209E1
Check/Instruction Screen 1
OK Button
Press this button after the checks are
completed.
The Guide Buckle screen appears and
the mechanisms move to their set
positions.
There are three types of sheet guides.
Remove the sheet guides before doing the
automatic setup.
After doing the automatic setup, install the
sheet guides to match the sheet size. When
using small sheets, the sheet guides are not
needed. For longer sheets, install or replace
the guides.
This prevents the suction head from hitting the table when the table moves.
Remove the knife fold stopper before doing the automatic setup.
If you will be doing knife folding, install the knife stopper after the automatic setup.
Remove the side guides before doing the auto-
matic setup. If the distance from the knife to
the side edge of the sheet is less than 95 mm
(3.8") after the automatic setup is done, the
knife side guides may not automatically move
close enough to the sheets. In this case, install
the side guides for small sheets. If the distance
from the knife to the edge of the sheet is 95
mm (3.8") or more, the knife guides are set
automatically.
Automatic
setup
Cancel Button
Press this button to return to the
Guide/Buckle screen.
Operation
Side Guides for Small
Sheets
Check/Instruction Screen 2
1-2-10
Check/Instruction
23051
10209A1
23051
10209C1
23051
10209D1
27