Horizon Fitness AFC-566F Manual page 54

3-4 Loading the Sheets on the Table
Raise the feed table.
- Press the Feed Table Up button on the control
panel.
Check the position of the suction
head while the table is rising.
- Position the suction head so that the set register
pin just touches the tail edge of the stack.
If the stack is not arranged correctly, and the
set register pin does not fit against the tail
edge of the stack, straighten the stack. If the
stack is not arranged correctly, the feeding
action may become uneven.
- If you need to adjust the position of the suction
head, adjust it by following the steps below.
1. Lower the feed table by 20 mm (0.79").
Do not adjust the suction head while the feed
table is in stanby position. Otherwise, the suc-
tion head may hit the piled sheets.
Feed Standby Screen
2. Adjust the position using Guide-Buckle
screen.
3. Raise the feed table.
44
CAUTION
23051
30401I1
Guide-Buckle Screen
23051
30401D1
Set Register
Pin
23051
30401E1
23051
30401F1