Set Up - Roller Gap Screen - Horizon Fitness AFC-566F Manual

1-2 Touch Panel Description

1-2-8 Set Up - Roller Gap Screen

This screen shows the gap between each pair of rollers, measured by the number of sheets, accord-
ing to the settings indicated on the Fold Pattern screen. The gap between each pair of rollers can be
adjusted automatically to the desired number of sheets.
This opens the Roller
Gap Fine-Tune
screen. (See the next
page for details.)
Default Value Set/Indication
Button
The machine calculates these
settings using the sheet
dimensions and fold pattern.
The upper perf-
oration shaft is
lifted, and the
upper and lower
perforation
blades are
separated.
When upper
perforation shaft
is lifted, this button
is indicated in
orange color.
The upper perf-
oration shaft
returns to the
original height.
Roller Gap Adjusting Start Button
Press this button to set the new gaps after
changing the values of the roller gaps.
: Send each roller directly
to the gap setting.
: Send each roller to the
home position, then to the
gap setting.
Use this function to move the upper blade over
the lower blade, or when aligning the upper and
lower scoring wheels.
Upper
Perforation
Blade
When moving
Lower
the upper
Perforation
blade over
Blade
the lower
blade
23051
10207B1
Roller Gap Screen
These areas indicate the buckle
chutes and knives being used.
Increase the Gap
Each time this button is pressed, the
roller gaps increase by one sheet.
(Actually, the roller gaps do not change
until the button is
Gap Setting Auto
This section shows the gap between the
rollers, measured by the number of
sheets.
Decrease the Gap
Each time this button is pressed, the
roller gaps decrease by one sheet.
(Actually, the gaps do not change until
the button is pressed.)
If the actual roller gaps and the set-
tings do not match, press
once to reset the gaps to the home
positions.
Upper Scoring
Wheel
Lower Scoring
Wheel
23051
10207A1
1-2-8
pressed.)
25